1990 RYAZAN PT 283102 Drills, DEEP HOLE - See Also A5704, D4554, D4904 | Industrial Machinery Exchange Inc.
Overview
Type:
Drills, DEEP HOLE - See Also A5704, D4554, D4904
Manufacturer:
RYAZAN
Model:
PT 283102
Condition:
New - In-Stock
Year:
1990
Stock #:
9283
Status:
For Sale
Description

Ryazan PT 283102 With reference to your recent request, we would like to submit the following quotation for your consideration. 1 Only Reengineered Ryazan Deep Hole Boring Machine Ryazan Model PT 283102 2000mm Deep Hole Borer Drilling & Boring Capacity Boring length 600 - 2000mm Boring capacity in solid 30-100mm Counter Borer 250mm Trepan 250mm Capacity Centers height over the slide way 315mm Swing Over Bed 630mm Total Width of bed 630mm Width of slide ways 160mm Total Bed Length 6000mm Hardened Bed Ways Work Piece Headstock Spindle speeds 40-500 rpm Headstock spindle speeds quantity 12 Hollow spindle in headstock 90mm 4 jaw Chuck, 400mm dia. Main Motor 30kw AC Motor Torque 3000 Nm Boring Carriage Counter Rotation 100 - 630rpm Boring head feeds variable 3-3000mm/min Boring bar rapid travel 3000mm/min Hollow spindle in boring head 85mm Boring Thrust 50,000N 12kw Fan assisted AC motor Work Piece Steady 3 Point roller steady 100-300mm dia. Capacity Boring bar damper Cartridge and damper cones supplied on request at extra cost Please note that max boring length reduced to 1900mm when damper fitted. Boring Operation Solid boring Pull boring or counter boring Trepanning Machine Data Year 1990 Weight 14,000kg Indicators & Operating Controls Chuck Inch FWD/REV Chuck Run FWD/REV Oil ON/OFF Boring carriage Rapid LEFT/RIGHT Emergency Stop Machine ON/OFF Inch FWD/REV Run FWD/REV Oil ON/OFF Boring carriage rapid LEFT/RIGHT Stop Boring carriage feed LEFT/RIGHT Counter Rotation Inch FWD/REV Counter Rotation Run FWD/REV Sealing head clamps ON/OFF Sealing rapid LEFT/RIGHT Variable speed control of headstock speeds, oil flow and feed rate Digital display absorbed power of headstock (AMPS) Digital display absorbed power of delivery oil pump (AMPS) Digital display absorbed power of counter rotation head Digital display absorbed power of feed force (AMPS) with pre-set limits for broken tool protection Digital display of tool position with pre-set depth control facility Emergency Stop Inch FWD Feed LEFT/RIGHT Feed STOP Rapid LEFT/RIGHT Emergency Stop Broken tool Protection Feed stop of boring carriage Automatic backward motion of boring head Spindle stop Pumping station stop Standard Equipment New Electrical equipment for controls with motors New Fan cooled cabinet Pipes for coolant system Continuous lubrication system of head units New Cable carrying chains Oil & chips discharge pipe New Interlock safety guards Carriage with timed automatic lubrication system with level control and thrust meter. New Hydraulic unit & pipework for clamping of sealing head saddle Refurbished Ryazan sealing head Electrical & hydraulic drawings Oil tank (Suggest 6000 LTR but we can manufacture required size) Delivery Pumps (We suggest 650LTRS/Min but we can supply different size to suit application) Swarf Conveyor (Two Hundred & Thirty Nine Thousand Pounds) Sale Conditions All prices quoted are to be understood to without any other taxes/fees. The order can be placed in USD / Euro's / Can $'s on an agreed exchange rate at the time of placing an order. Delivery Time 3-5 Months from date of order and deposit payment Unloading container and placing machine on foundation for the buyers account. Testing Dry test run of the machine on completion of overhaul and retrofit will be undertaken in GD Machinery's Sheffield premises. The date fixed for testing shall be notified to you with adequate prior notice to allow your personnel to be present. Starting Up & Control Training Final levelling, start up, training on our control to your personnel, in your factory by our technicians at our charge. At your charge travel, board and lodgings. We require a minimum of one qualified electrician and a qualified engineer available during installation. Customer must provide skilled crane or fork truck operator. Buyers Obligation Complete foundation and all necessary work of whatever type before the start of work by our personnel. Prepare all installations (lights, power, water, etc.) as well as necessary lifting equipment and internal transport Warranty 12months or 2000 working hours from acceptance date on all new electrical equipment. Payment 30% with Order 60% upon acceptance in Sheffield, and prior to shipment. (customer inspection and run off at the factory is encouraged) 10% upon final acceptance at Castool. 1) BTA spindle mounted boring bar driver, DIN 55027 size 11, bayonet mount, $7,520.00 USD Tube size range 803-823 (22 - 143 mm) 1) Vibration dampener cartridge, 280 mm (11.02 in) mounting diameter, $12,470.00 USD Standard actuation, locknut spanner wrench Tube size range 811 - 823 (43 - 142 mm) 1) 236S rotating pressure head (355mm mount), Tool diameter range, 19 - 150mm (0.75 - 6.0 in) 45 bar (652 psi) max. $ 44,420.00 USD 1) 20" 3-jaw chuck with adapter plate for pressure head, $ 6,995.00 USD Heller of Troy MI, Terms and payment conditions to be discussed and agree TERMS AND CONDITIONS Legal title of the goods shall not pass to the customer until the vendor has received payment in full. It is the user's responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine or machines to Provincial, Federal, and Local Government Safety Standards and all Industrial Safety Standards. User agrees to indemnify and hold harmless Seller of and from any and all claims of Liabilities from accidents involving these machines caused by failure of user, his employees, and agents to follow these instructions, warnings, and recommendations available from the original manufacturer or by failure of user to comply with Provincial,Federal, and Local laws applicable to such equipment.

Specifications
Weight14,000 kg

Tooling package: Separately priced in USD Delivery: 10 Weeks from the date of placing the order, Supplied by BTA Total price: 239,000.00 (Pounds) Stock number: SN 18